Boiler Service, Landlord Certificates and Legionella Testing
Scope
Boiler Service, Landlord Certificates and Legionella Testing
Our Gas Safe Registered Service Engineers will start with a visual check to ensure that the boiler and associated pipework is installed and positioned correctly, checking your boiler is operating correctly and identify any initial problems. They will then remove the boiler casing to look at its components, again checking the boiler is working safely and efficiently.
Our Service Engineer will check the following:
-
Correct gas pressure and flow.
-
Flue and combustion. A flue gas analyser will be used to make sure the boiler is burning the right mixture of gas and air, that the flue is not blocked.
-
Electrical connections are clean and in good condition.
-
Fans and other key components are working efficiently.
-
Seals are intact.
-
Electrodes are in a good condition.
-
Safety devices are checked.
-
Condensate trap and pipe are not blocked.
-
Water and gas pipework.
Our Service Engineer will inform you if the boiler does not meet building and safety, legislation and regulations during their checks which will be included in a full service report. This will explain any repairs or maintenance works required to be undertaken.